Recover Profits Faster with Endeavour® ESP Systems
Our portfolio of electric submersible pumping solutions has been proven to provide reliable, high-performance artificial lift in thousands of installations.
With experience in the design, installation, and optimization of ESP systems for both unconventional horizontal wells and conventional applications, we will help you efficiently meet your production targets.
Available in multiple configurations and flow rates, our pumps are designed to help you maximize well productivity while extending the run life of your equipment – even in the most complex downhole environments.
| Pump Series | Minimum Casing Size | Recommended Operating Range (60 Hz/3500 rpm) | |
| VA | 4.5” (114.3 mm) | 300-3,400 bpd | 40–451 m3/d |
| VC | 5.5” (139.7 mm) | 200-7,500 bpd | 27–994 m3/d |
| VE | 7.0” (177.8 mm) | 400-14,000 bpd | 53–1,855 m3/d |
| VG | 8.625” (219.1 mm) | 2,200-26,300 bpd | 292-3,485 m3/d |
Robust Performance Over Extended ESP Run Times
Our motors feature designs that reduce heat generation, thereby extending overall run life and efficiency. With Endeavour motors, you can realize:
- Reliable and powerful performance
- Enhanced durability and sustained production
- Minimized operating/power costs
- Improved corrosion resistance
Motor Specifications
| Series | Minimum Casing Size | Single Motor Horsepower Range | |
| (50 Hz) | (60 Hz) | ||
| V3 | 4.5” (114.3 mm) | 12.5-50 | 15-60 |
| V422 | 5.5” (139.7 mm) | 140 | 168 |
| V456 | 5.5” (139.7 mm) | 20-180 | 24-216 |
| V562 | 7.0” (177.8 mm) | 40-380 | 48-456 |
| V450 PM | 5.5” (177.8 mm) | 40-360 | 48-432 |
| V562 PM | 7.0” (177.8 mm) | 83-833 | 100-1,000 |
Since needs vary greatly by well and location, our team will work with you to discuss challenges, analyze all possible options and determine the best motor solution for your unique situation.
By equalizing downhole pressure and preventing motor damage, selecting the right seal for your ESP ensures longer run life for the entire equipment string.
| Series | Thrust Bearing | Housing | Head & Base | Shaft | Bag/O-Ring Elastomers |
|---|---|---|---|---|---|
| V3
3.38 in. |
Standard Load | Carbon Steel | Carbon Steel | Monel, Corrosion Resistant, Standard Strength | Aflas® |
| V4
4.00 in. |
Standard Load | Carbon Steel | Carbon Steel | Monel, Corrosion Resistant, Standard Strength | Aflas® |
| V5
5.13 in. |
Standard Load | Carbon Steel | Carbon Steel | Monel, Corrosion Resistant, Standard Strength | Aflas® |
Our team will work with you to assess your well’s operating conditions and determine the best seal for your application.
Getting the most out of your electric submersible pump begins with the ability to monitor and control system performance in response to dynamic production conditions.
Our Pulse® sensors offer a window into the pay zone necessary to drive production optimization.
| Specifications | |
| Length | 16.8” (42.7 mm) to 49” (124.5 mm) |
| Housing Metallurgy | Carbon Steel or Stainless-Steel |
| Seals | Sealed Module or Water Proof |
| Max Operating Temperature | 125°C to 177°C |
| Measurements |
|
Click here to view Controls Page
Variable Speed Drive Specifications
| Input Converter Options | 6 Pulse, 12 Pulse1, or 24 Pulse |
| Output Harmonics Modifier | Integral Sinewave Filter |
| Overcurrent Limits | PVES Series: 150% of Rated Amps for 60 seconds(ND), 120%(ND)PVET Series: 120% of Rated Amps for 60 seconds |
| Power Modules | A1000, AK06-MM, Induction Motor or Permanent Magnet Motor Control |
| Efficiency | 97% + At Full Load |
| Enclosure | NEMA 4 |
| Max Temperatures | PVES Series: Operating – Up To 122ºF [50ºC] Storage/Transport – Up To 158ºF [70ºC]PVET Series: Operating – Up To 140ºF [60ºC] Storage/Transport – Up To 149ºF [65ºC] |
1Phase-Shift Transformer is required for all 12 Pulse VSD applications
Reinforced Constructions for Deep, Abrasive Wells
Abrasive solids shouldn’t get in the way of your production. Our abrasion-resistant modular (ARM) reinforcements allow you to maintain your ESP’s efficiency as solids production changes over the life of the well.
ESP Gas Management Solutions
Our Intercept™ gas management portfolio ensures uninterrupted operations in high gas-to-oil ratio wells.
Solutions for Narrow, Deviated Wells
Don’t get stuck in a tight spot.
Through smart designs and verified performance tests, our teams developed a slimmer motor and reinforced connections for deviated or tight radius wells, minimizing expensive downhole complications.
Looking for an ESP solution not listed here? Just contact us.
We are a flexible, service-oriented company, and we are committed to going the extra mile to fulfill your production needs.
Call us at 405.605.4567 or send us an email.